Insulation4US – Simple Solutions For Assessing

If you have an adequate heating system in your house but it’s still cold, then there’s a simple solution. You need to review the insulation in your home. Insulation is like a snug blanket around your house that stops all that heat you’ve created from disappearing outside. With the right insulation, your house will stay warm during the winter. Have a look at click for more info for more info on this.

Image result for Insulation

Insulation is usually placed in the ceiling, the floors and the walls.

The greatest heat loss occurs in the ceiling. About 40% of heat loss from a non-insulated house is through the roof, due to the tendency of warm air to rise. High levels of ceiling insulation provide the highest benefit in terms of energy savings.

A significant heat loss of approximately 20 – 30% occurs through the walls. Wall insulation levels should be maximized when the building is constructed, because upgrading at a later stage is difficult and expensive.The heat loss area in the floor is about 10 – 15%. Effective under-floor insulation removes that cold air layer pushing all your heat to the ceiling. If the under-floor insulation material is also a vapour barrier, it will prevent ground moisture moving into the house.

So the first step you need to take is to evaluate your existing insulation. First of all, find out if there is any insulation in your house. Once you’ve done this, assess the quality of the existing insulation. If you need to improve your existing insulation or would like to start from scratch, then you need to decide the type of insulation that is best suited for your house. Blankets or segments, made from fibreglass, polyester or wool, can be put into ceilings and walls, as can loose-fill insulation, like cellulose, or foam insulation. These products can go into the walls and ceilings of houses while they are being built. In existing houses, they can only be installed in accessible ceiling cavities. For floors, reflective insulation systems like aluminium foils are effective in reducing downward heat flow. Rigid insulation which can be made from plastic foams or polystyrene can also be used as under-floor insulation.

When selecting insulation products, take into account the R-value. This is a measure of how well the insulation resists heat flow. A high R-value means the insulation is highly effective in slowing down the transfer of heat, therefore keeping your house warm. So, choose insulation with a higher R-value. During the selection process, you should consider other factors like the insulation’s fire-retardant and pest-retardant qualities and its levels of toxicity. Check to see if it is dust free, non-allergic and non-irritant. Is it affected by moisture, mould or mildew? Read any material about the insulation thoroughly. Finally, see if there is a guarantee.